Open-mouth and pasted bottom

"Tailor made" composition based on customer specifications. From 1 to 5 layers of paper or plastic, including laminates.
Special materials in contact with the product: ALU-coated paper, Coex, LDPE, HDPE.

Printing
High quality flexographic HD print up to 11 water-based colours and, if requested, standard varnish or UV laquering. Low-slip treatment over the printing. High digital definition print up to 70 lines and shades down to 1%.

Typologies
Sacks made by only paper
Sacks made with paper and poly tubing in contact with the product with or without z-fold
Sacks with polyethylene film inserted between the layers of paper
Sacks with aluminium in contact with the product
Sacks with hot melt applied at the mouth. See the Specialty SafeSack®

Specifications

Size
Width: from 30 to 70 cm
Length: from 42.5 cm to 120 cm
Bottom width: from 8 to 22 cm

Features and optionals
Different types of liner: LDPE, HDPE and Coex
Single or double seal at the bottom
Air removal systems by micro-perforation of the polyethylene and the sheets of paper
Straight cut
Cut with flap with pre-application of hot melt at the mouth, which can be reused by customers for sealing the sack (pinch top)
Inside patch for maximum seal of the bottom when bagging fine powdered products
Handle at the bottom
Easy Open system for bottom aperture                                                                                      Thumb cut

Raw materials

Raw materials in compliance with all European current regulations for food contact packaging.
All the best types of Scandinavian paper, white, brown, standard, semi-extensible, high porosity, high performance, anti-slip, glazed, machine glazed, single-coated, single-coated greaseproof
Aluminium-coated paper (paper + PE + AL + PE)
Sandwich paper (paper + PE + paper)
Polythene-coated paper (paper + PE)
Low Density Polyethylene (LDPE), tubing or internal layer
High Density Polyethylene (HDPE), tubing or internal layer
Special Coex with up to 5 layers